Benzalkonium Chloride SDS MSDS of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Benzalkonium Chloride, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Benzalkonium Chloride SDS Safety Data Sheet
MSDS, Material Safety Data Sheet 06-Oct-21

Product Name & Other Names: Benzalkonium Chloride, BZK, BKC, BAC, alkyldimethylbenzylammonium chloride and ADBAC
CAS No.: 8001-54-5 or 63449-41-2
EINECS EC Code: 264-151-6
Molecular Weight: Variable.
Chemical Formula: Variable.
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, Oral (Category 3), H301
Acute toxicity, Dermal (Category 4), H312
Skin corrosion (Category 1B), H314
Chronic aquatic toxicity (Category 1), H410

Hazard Statements:
H301: Toxic if swallowed
H312: Harmful in contact with skin.
H314: Causes severe skin burns and eye damage.
H410: Very toxic to aquatic life with long lasting effects.

Precautionary Statements
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash ... thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P272: Contaminated work clothing should not be allowed out of the workplace
P273 Avoid release to the environment.
P280-Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310+330: IF SWALLOWED: Rinse mouth and immediately call a POISON CENTER or doctor/physician.
P302+P352: IF ON SKIN: Wash with soap and water.
P303 + P361 + P352 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P314: Get Medical advice/attention if you feel unwell.
P330: If swallowed, rinse mouth.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P390 Absorb spillage to prevent material damage.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405: Store locked up.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Product Name/Synonyms: Benzalkonium Chloride, BZK, BKC, BAC, alkyldimethylbenzylammonium chloride and ADBAC. >50% in water.
CAS No.: 8001-54-5 or 63449-41-2
EINECS EC Code: 264-151-6

Inhalation: If inhaled, it will cause irritation and damage to nose and throat. Remove the victim to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: It will cause irritation and burns to mouth, digestive tract and stomach. Contact medical center quickly. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: On contact, it can cause itching, pain, swelling and redness. Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: It can cause severe damage to eyes. Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention.

Fire: Combustible.
Toxic fumes, nitrogen oxides, carbon dioxide and carbon monoxide may be formed in fire.
Fire Extinguishing Media: Dry chemical, foam or carbon dioxide or water jet.
Unsuitable extinguishing media: Do not use a direct stream of water to extinguish.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Avoid mist formation. Keep away from heat. Keep away from sources of ignition. Provide ventilation. Wear full protective equipment and ensure proper ventilation.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and strong acids & alkalis and reducing agents. Keep away from heat and source of fire preferably in a ventilated area. Keep in tightly closed container. Do not breathe mist or dust. Do not store near food items.

Airborne Exposure Limits: Contains no substances with occupational exposure limit values.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and engineering controls are not feasible, consult an industrial hygienist. For emergencies, or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice.

Appearance: Colorless to slightly yellow liquid. (Anhydrous material is white to off-white powder).
Odor: Characteristic smell.
Odor threshold: Not available.
pH: 5 to 9.
Relative density: 0.97 approximate.
Melting point/freezing point: Not available.
Boiling Point: >100C
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: miscible with water
Viscosity: No data found.

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Toxic fumes, nitrogen oxides, carbon dioxide and carbon monoxide may be formed in fire.
Hazardous Polymerization: Not reported.
Incompatibilities: Strong acids & alkalis, oxidizing & reducing agents, heat and sparks. Hygroscopic. Also incompatible with nitrates, anion detergents.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles.

Toxic if swallowed; Harmful in contact with skin; Causes severe skin burns and eye damage.
Oral rat LD50: 240 mg/kg
Dermal rat LD50: 1420 mg/kg.
Reproductive Effects: No data found.
Developmental Effects: No data found.
Teratogenicity: No data found.
Carcinogenicity: The product is not listed as carcinogen by OSHA, IARC, ACGIH or NTP.

Environmental Toxicity: Very toxic to aquatic life with long lasting effects.
Toxicity to fish:
mortality LOEC - Oncorhynchus kisutch - 17.8 mg/l - 3.0 d
LC50 - Lepomis macrochirus - 0.31 mg/l - 96.0 h
mortality NOEC - Oncorhynchus kisutch - 10 mg/l - 3.0 d.
Results of PBT and vPvB assessment: No information found.
Persistence and degradability: No information found.
Mobility in soil: No information found.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

DOT USA & ADR/RID Europe
UN Number: 3261
Proper shipping name: Corrosive liquid, acidic, organic. NOS (Benzyl-C12-14-alkyldimethylammonium chlorides)
Class: 8, Packing group: II
IMDG & IATA
UN Number: 3261
Proper shipping name: Corrosive liquid, acidic, organic. NOS (Benzyl-C12-14-alkyldimethylammonium chlorides)
Class: 8, Packing group: II

USA:
SARA 311/312: Acute & Chronic. See section 2.
California Prop 65: No Significant Risk Level: None of the chemicals in this product are listed.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

CAS Number 8001-54-5 or 63449-41-2, Benzalkonium Chloride manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.